FPC-6831 Vezco One Door Station 2MP Outdoor Video IP Intercom Access Control Card Reader, In Swinging Door Visionis 1200lbs, Exit Button, Wifi Monitor Remotely Open by App PC Software with PIR

Description

This KIT has a 3 YEAR warranty with full access to tech support in the USA!

Kit Includes

(1)

VZ-IP-AINT1DS-2NG – One Channel Outdoor Station + IP Video Intercom + HD 2 MP Camera + Built In Access Control Mifare Reader + Card Module + Remote Unlocking + Smart Phone App + Standard POE + Aluminum Housing

(1)

VIS-ML1200LED - 1200lb Indoor Electromagnetic Lock with LED Sensor

(1)

VIS-ZL1200 - L and Z Bracket for 1200lbs Electromagnetic Lock

(1)

VZ-INT-7ETL - Touch Screen + Video Indoor IP, Wi-Fi Station Intercom, 7 Inch Touch Screen Monitor, Standard POE

(1)

VIS-7001 - Indoor + Outdoor Weather, Waterproof Rated IP65 Stainless Steel Door Bell Type Round Request To Exit Button Standard Size For Door Access Control w/ LED Light, NC, COM, NO Outputs

(10)

VS-VIS-APROXCARD-26THCOMBO - Access Control Proximity Contactless Smart Entry Card 1.8mm Thick EMT1400 and Mifare

(1)

VISCP200 - 12 Volt 2Amp Power Supply Transformer, UL Listed

(1)

VIS-8004 - 1 Channel RF Receiver 315MHz

(2)

VIS-8005 - 1 Channel RF 315mhz Transmitter Remote Control

(1)

IrexPlus - Rokonet Risco Request to Exit PIR motion Sensor with Internal Buzzer and Relay Timer

(2) 2 amp power supply

Description

The 6831 kit is an access control intercom kit for doors that open in. It is designed to give access to a certain room, office or building (depending on your application) to certain people and view your visitors outside to grant or deny access. This system brings a magnetic lock, bracket, intercom outdoor station, indoor touch screen intercom monitor, exit button, power supply, wireless rf receiver, wireless rf remote, Mifare proximity cards, and request to exit PIR.

The Vezco outdoor station has both intercom and access control functions, card reader supported, with a high-performance embedded SOC processor. The one-touch calling function is supported by HD video surveillance, noise suppression, echo cancellation, and low illumination. Registered users can present their Mifare card and gain access. Since this is a standalone system, meaning that there is no software, it is recommended for you to keep a record of all personnel and their assigned user ID with each card.

The remote feature on the Vezco outdoor station allows for reboot, upgrade, time synchronization via NTP, and a batch configuration function. The reader that is included in the outdoor station does not indicate or track user information from desktop software. However, you can see and remotely unlock the system via the computer software or mobile application and answer calls as well.

The Vezco indoor intercom monitor provides a hands-free audiovisual experience that allows communication with the door station. It supports panic calls, 2 channel zone alarm, and monitoring door stations with external cameras. This unit also provides remote unlocking via the software and mobile app like the outdoor station. The 7-inch colorful TFT LCD screen provides a 1024 × 600 resolution and H.264 video compression. It auto-uploads messages to the master station with the software or the app once the alarm sensor is triggered.

The electromagnetic lock (commonly referred to as a “maglock”) is installed beneath the top of the door frame to make sure that the door remains closed and locked. With the VISML1200LED, you have up to 1200lbs of force protecting the door, which means it would take above 1200lbs of force to open the door if someone wanted to force entry. The LED light on the maglock helps you identify when the maglock is locked and unlocked. When the light is red, the maglock is locked. When the light is green, the maglock is unlocked. The Visionis 7001 is a standard sized doorbell type push to exit button.  With the illuminated blue LED backlight and stainless-steel plate, it gives the exit button that much more of a presence and professional look.

The remote communicates with the wireless receiver, which can program up to 50 remotes, and it has a range of 160 feet. There are two main features on the receiver that will allow you to program the wireless receiver in two different ways. The default function of the receiver is that when the power is on, the mag lock of your kit is locked and when you press the remote the maglock will unlock temporarily to open the door. The other function that the receiver has is the ON/Off feature. This feature is very similar to a light switch; when you program this option, you would press the remote once and the door will unlock and remain unlocked until you press the button again. When you press the remote again, the door will then lock.

The passive infrared sensor is specifically designed for request-to-exit applications, includes qualified motion analysis. The sensor may be mounted to frame header, wall or ceiling. Intended for indoor use only. It has a relay output, adjustable time delay from 0.5-6.4 seconds, and dual voltage.

Attention:

• You must plug in this system to your LAN. If you do not have internet connection, this will not work the way it is supposed to.
• The only card compatible with this system is model Number. VIS-APROXCARD/26THCOMBO. You may not use card model No. VIS-APROXCARD/26 or Model No. VIS-AKEYTAG . At the moment no keytag is compatible with this product.
• This system only uses Mifare cards not EM cards.
• There are 3 ways to open the door remotely. 1). Via the Monitor 2). Via the mobile app 3). Via the Desktop Software.
• This kit does not include install wire. Use UTP cable for LAN Connection and 18/4 for locking device and or exit button.
• This system can also integrate via software with our CCTV and Access control products.
• The monitor that is included can be connected to the system via wifi.
• This system does not include the LAN cable, it need to be connected to your router.
• In the shipment of this kit you will find a pamphlet indicating on how to download the desktop and Mobile app software.
• Name of the mobile app is VEZCOGO, the app can be found on App Store and Google Play.
• Terms: “Door station” is the camera and doorbell option that will go outside of the door. “Indoor station” is the Monitor that is used to be installed inside.
• Very Important: The reader that is built in the “Door station” will not sync with our access control system in the sense that you will not have any type of reporting or permissions. This reader is only standalone.
• There is a limitation of 2500 card numbers.
• The Door station has a doorbell button that will ring in two areas if wanted. 1.) On the monitor, 2.) Via the app (the app does not have to be 100% open but it should be
  open at least in the background).
• 2 way audio, 1 way Video.
• Only Compatible with Microsoft Windows 7 or higher. Not compatible with mac.
• In a situation where you are going to have multiple entries, there is a maximum of 2 door stations per indoor station.
• There is a limit of 7 indoor station per outdoor station. This limit is per device, and not calling button. This applies to 1, 2, 4 door station.
• Door Station must be programmed via VezPro or VSAxess Software.
• Access control cards must be configured via the software

What type of door can I use with this kit?

WOOD DOOR

METAL DOOR

GLASS DOOR

PVC DOOR

Installation Pictures