FPC-6391 One Door Access control OutSwinging Door 433MHz Wireless Keypad / Reader + Wireless Exit Button + Hard Wired 2,600lbs Electric Drop Bolt with Key cylinder + PIR Included + No software Kit
$366.83
Out of stock
Contact an ExpertNOTE: Order Before 3:00pm EST on a week day and your order will be shipped out the same day
Free shipping with in the USA including Puerto Rico, Hawaii and Alaska
ATTENTION: Before purchasing, it is recommended that the customer checks with their local fire authority to see if there is any additional product they may need in order to comply with the local fire codes. We are not responsible for the improper installation of our product(s) or any type of fees that can be incurred by not complying with your local fire authority.
Click on the boxes below for different options:
Description
This KIT has a 3 YEAR warranty with full access to tech support in the USA!
Kit Includes
(1)
(1)
(1)
(1)
IrexPlus - Rokonet Risco Request to Exit PIR motion Sensor with Internal Buzzer and Relay Timer
(5)
(5)
VIS-AKEYTAG - Access Control Proximity Contactless Smart Entry Keyfob 26 bit 125khz
(1)
VISCP100 - 12 Volt 1AMP Power Supply Transformer
Description
The device is a single door wireless access control, consists of a wireless & waterproof keypad, a mini controller, and a wireless exit button. 433MHz rolling code of encryption algorithm and the split design guarantees higher-secure.
The keypad can store 600 PIN/card users, including 500 common users and 100 visitors’ users. PIN length can be 4~8 digits, with internal & external alarm, door contact, exit button (wired) and doorbell.
Because of ultra-low power consumption, the keypad and exit button can work as long as one year (bases on 20 times/day), with just 3 units of AAA batteries and 1 unit Li-battery. It will remind people to replace batteries intelligently if low battery.
Features:
- Waterproof, conforms to IP65
- 600 PIN / card users (500 common users + 100 visitor users)
- PIN length: 4~8 digits
- Backlit keypad
- Communication frequency: 433MHz
- Communication distance: 50m Max.
- Door contact, alarm and doorbell output
- Pulse mode, toggle mode
- Tri-color LED status display
- Ultra-low power consumption (wireless keypad≤10uA)
ATTENTION:
- The Keypad and Exit Button are used as complete wireless transmitters. The black mini box is used as the Receiver.
- Keep in mind that if you use any type of Electrical lock, you must HARD WIRE it to the receiver.
- The wireless keypad uses 3 Units of AAA batteries and they are INCLUDED.
- The Wireless Exit Button uses 1 unit of 2032 lithium battery, THE BATTERY IS INCLUDED FOR THE EXIT BUTTON.
- All Wireless Devices included in this kit have already been paired with the receiver. No pairing is needed.
Specifications & Packaging
Model No. VIS-3200:
- User Capacity: 600 PIN / card users (500 common users + 100 visitor users)
- PIN Length: 4~8 Digits
- Card Type: 125KHz EM Card
- Operating Voltage:
Wireless Keypad: 3 units of AAA batteries (INCLUDED)
Mini Controller: 12V DC ±20%
Wireless Exit Button: 1 unit of 2023 Lithium battery (INCLUDED) - Idle Current:
Wireless Keypad: ≤10uA
Mini Controller: ≤20mA
Wireless Exit Button: ≤10uA - Working Current:
Wireless Keypad: ≤80mA;
Mini Controller: ≤50mA
Wireless Exit Button: ≤30mA - Dimensions:
Wireless Keypad: L134 x W48 x D25(mm) - L5.27 x W1.89 x D0.98(in.)
Mini Controller: L85 x W50 x D25(mm) - L3.35 x W1.96 x D0.98(in.)
Wireless Button: L80 x W38 x D15(mm) - L3.15 x W1.50 x D0.59(in.) - Unit Weight
Wireless Keypad: 150g
Mini Controller: 65g
Wireless Button: 34g - Communication Frequency: 433MHz
- Communication Distance: 50m Maximum (165 feet)
- Relay Contact Load: 2Amp Maximum
- Operating Temperature: -40°C~60°C (-40°F~140°F)
- Operating Humidity: 10%~90% RH
- Material: ABS Shell
Model No. VIS-DP103WCY-FSE-LED:
- Voltage: DC12V - DC24V
- Holding Force: 1200Kg (2600lbs)
- Current: (DC12V): Standby 150mA
- Function: Fail Secure. N/O with power it’s unlock
- Time Delay: 0/3/6 sec; Unlock time delay: 6 sec (If do not push the door after unlocking, again automatically lock)
- Bolt: SUS 304 solid stainless steel
- Size: 250Lx30Wx49H (mm) - 9.84Lx1.18Wx1.93H (in.)
- Product + Packaging Weight: 1.46Kg (3.22 pounds)
- Operating Temperature: -20°C / +50°C (-4°F / 122°F)
- Cycles Tested: 300.000
Model No. VIS-8013:
- Operating Voltage: 1 unit of 2032 Lithium battery (INCLUDED)
- Idle Current: ≤10uA
- Working Current: ≤30mA
- Communication Frequency: 433MHz
- Communication Distance: 50m Maximum (165 feet)
- Relay Contact Load: 2Amp Maximum
- Environment: Indoor
- Operating Temperature: -20°C~60°C (-4°F~140°F)
- Operating Humidity: 0%~86%RH
- Physical: ABS Shell
- Dimensions: L80 x W38 x D15(mm) - L3.15 x W1.50 x D0.59(in.)
- Unit Weight: 34g
Model No. IrexPlus:
- Voltage: 12-30 Volts DC or AC
- Current Consumption: 8 mA standby, 25 mA (Relay+LED), 44 mA maximum (Buzzer+Relay+LED) at 12/24 VDC
- Relay Output: 1A @ 30 VDC or VAC, two form “C” contacts
- Tamper Output: 50 mA @ 30 volts DC or AC
- Detection System
- Mounting Height: 2.3m - 4.6m (7.5' - 15')
- Detection Range: Up to 2.4m (8')
- Dimensions (LxHxD): 177mm x 50mm x 45mm (7'' x 2'' x 1.8'')
- Weight: 0.15Kg (0.3lb)
- Colour: White or Black
- Environmental
- RFI Immunity: 30 V/m from 10MHz to 2GHz
- Operating & Storage Temperature: -20°C to 60°C (-4°F to 140°F)
Model No. VS-VIS-APROXCARD/26:
Proximity cards (or access cards) are hybrid technology that incorporate a simple electric circuit (proximity tag and coil) embedded in a plastic card. No battery is needed and the circuit is not removable without destroying it and the card. When the card is correctly positioned with respect to a reader a high speed RF signal passes between card and reader and unique data is transferred. This ISO standard proximity card is 1.8mm thick and can have printed material attached to the front. It is supplied with a pre-assigned unique code.
Model No. VIS-AKEYTAG:
- Proximity contactless Smart Entry Keyfob 26 bit 125khz
- Range: 5cm-10cm (1.97″-3.94″)
- Water proof
- Shock proof
- Uses ultrasonic connection
- Each tag has a unique pre-assigned code (8 digit number) printed on the back
- Dimensions: 39mm x 35mm x 7mm (1.54″ x 1.38″ x 0.28″)
All files are in PDF format. To download the file click on the link and a page will be open in a different window with the “DOWNLOAD” button. When you click the button a pop up will show up with a checkbox field, to verify you are human, mark the checkbox and the PDF file will start to download.
PDFs
You must be logged in to post a review.
Applications
-
Gas Stations
-
Laundromats
-
Jewelry Stores
-
Secret Rooms
-
Pawnshops
-
Real Estate Office
-
Dr. Office
-
Other Offices
Reviews
There are no reviews yet.