Click on the boxes below for different options:
This KIT has a 3 YEAR warranty with full access to tech support in the USA!
The device is a single door wireless access control, consists of a wireless & waterproof keypad, a mini controller, and a wireless exit button. 433MHz rolling code of encryption algorithm and the split design guarantees higher-secure.
The keypad can store 600 PIN/card users, including 500 common users and 100 visitors’ users. PIN length can be 4~8 digits, with internal & external alarm, door contact, exit button (wired) and doorbell.
Because of ultra-low power consumption, the keypad and exit button can work as long as one year (bases on 20 times/day), with just 3 units of AAA batteries and 1 unit Li-battery. It will remind people to replace batteries intelligently if low battery.
- Waterproof, conforms to IP65
- 600 PIN / card users (500 common users + 100 visitor users)
- PIN length: 4~8 digits
- Backlit keypad
- Communication frequency: 433MHz
- Communication distance: 50m Max.
- Door contact, alarm and doorbell output
- Pulse mode, toggle mode
- Tri-color LED status display
- Ultra-low power consumption (wireless keypad≤10uA)
- The Keypad and Exit Button are used as complete wireless transmitters. The black mini box is used as the Receiver.
- Keep in mind that if you use any type of Electrical lock, you must HARD WIRE it to the receiver.
- The wireless keypad uses 3 Units of AAA batteries and they are INCLUDED.
- The Wireless Exit Button uses 1 unit of 2032 lithium battery, THE BATTERY IS INCLUDED FOR THE EXIT BUTTON.
- All Wireless Devices included in this kit have already been paired with the receiver. No pairing is needed.
Specifications & Packaging
Model No. VIS-ML300LED:
- Voltage Input: 12 VDC / 24 VDC
- Current Draw: 12V / 300mA ; 24V / 150mA (±5%)
- Holding Force: Up to 300 lbs (136 kg)
- Anti-Rust Surface Treatment: Blue Zinc Plating
- Operating Temperature: 0~55° C ( 32~131° F)
- Operating Humidity: 0~95% ( non condensing)
- Weight ( Magnet): 0.6 kg (±1%)
- Dimensions: Magnet – (L)170x(W)35x(T)21 mm Armature – (L)130x(W)33x(T)11 mm
- Green/Red LED Indication for EM Lock Status
Model No. VIS-3200:
- User Capacity: 600 PIN / card users (500 common users + 100 visitor users)
- PIN Length: 4~8 Digits
- Card Type: 125KHz EM Card
- Operating Voltage:
Wireless Keypad: 3 units of AAA batteries (INCLUDED)
Mini Controller: 12V DC ±20%
Wireless Exit Button: 1 unit of 2023 Lithium battery (INCLUDED)
- Idle Current:
Wireless Keypad: ≤10uA
Mini Controller: ≤20mA
Wireless Exit Button: ≤10uA
- Working Current:
Wireless Keypad: ≤80mA;
Mini Controller: ≤50mA
Wireless Exit Button: ≤30mA
Wireless Keypad: L134 x W48 x D25(mm) – L5.27 x W1.89 x D0.98(in.)
Mini Controller: L85 x W50 x D25(mm) – L3.35 x W1.96 x D0.98(in.)
Wireless Button: L80 x W38 x D15(mm) – L3.15 x W1.50 x D0.59(in.)
- Unit Weight
Wireless Keypad: 150g
Mini Controller: 65g
Wireless Button: 34g
- Communication Frequency: 433MHz
- Communication Distance: 50m Maximum (165 feet)
- Relay Contact Load: 2Amp Maximum
- Operating Temperature: -40°C~60°C (-40°F~140°F)
- Operating Humidity: 10%~90% RH
- Material: ABS Shell
Model No. AL-OD22:
- Supply Voltage: 12-24VDC or VAC
- Supply Current: 18-30mA@12-24VDC,45-80mA@12-24VAC
- Relay Output: 2C Contact(N.C/N.O), 24VDC 1A Max.
- Detection Type: Passive infrared
- Relay Hold Time: 0.5-64 seconds
- LED Indication: Red
- Operating Temp: -14° F to 131° F(-10° Cto55°C)
- Weight: 0. 4Ib (0. 18kg)
- Range Coverage: 12×5 ft at 7ft high,30×12 ft at 15 ft high(Adjustment)
- Humidity: 0-95% non-condensing
- Dimensions: 6.53″Wx1. 57″Hx1. 53″0 ( 166x40x39mm)
All files are in PDF format. To download the file click on the link and a page will be open in a different window with the “DOWNLOAD” button. When you click the button a pop up will show up with a checkbox field, to verify you are human, mark the checkbox and the PDF file will start to download.
Installation – Electromagnetic Locks
Unboxing Video – Electromagnetic Locks
Real Estate Office