Visionis FPC-7477 One Door Access Control Electric Strike Fail Safe with VIS-3022 Outdoor Keypad / Reader No Software EM Card Compatible 2000 Users + Wireless Receiver and Remotes

Model No. VIS-3022:

• Operating Voltage: DC 12V±10%
• User Capacity: 2000
• Card Reading Distance: 3-6 cm (1.18 – 2.36in.)
• Active Current: >60mA
• Idle Current: 25±5 mA
• Lock Output Load Max: Max 3A
• Alarm Output Load Max: Max 20A
• Operating Temperature: -45°C ~ 60°C (-49°F ~ 140°F)
• Operating Humidity: 10%- 90% RH
• Adjustable Door Relay Time: 0 -99 seconds
• Adjustable Alarm Time: 0- 3 minutes
• Wiegand Interface: Wiegand 26 bit
• Wiring Connections: Electric Lock, Exit Button, External Alarm, External reader
• Dimensions: 100*68*22mm (3.93*2.67*0.86in.)

Model No. VIS-EL101-FSA:

• Lock Size: 150Lx39.5Wx34H (mm) 5.90Lx1.55Wx1,34H (in.)
• Structure: Zinc alloy
• Holding Strength: 500kg (1100 pounds)
• Voltage: DC12V
• Current: 200mA
• Feature: Fail Safe. N/C Door remains open when there is no power
• Signal Output: Lock Status Output NO/NC/COM
• Suitable For: Wooden Door, Metal Door, PVC Door Surface
• Temperature: Within +20°C (+68°F)
• Suitable Temperature: -10~+55°C (14-131°F)
• Operating Humidity: 0～90% (non-condensing)
• Function: Built-out MOV
• Weight: 0.4kg (0.88 pounds)

Model No. VIS-PS100:

• Input voltage: 110 ~ 240V AC
• Input Frequency: 50 ~ 60Hz
• Output Voltage: DC12V
• Output Current: 3A
• Output Voltage: Trim Range ±10% ~ ±15%
• Load: 1% Typical
• Output Stability: 0.5% Typical
• Ripple and Noise: 1%, peak to peak (100mVp-p typical)
• Insulation voltage: Junior / sub-polar inter-1500V AC, primary / shell between 1500V AC, sub-polar / Shell between 500V AC
• Hold Time: Full load typically 20ms
• Operating Temperature: -20°C ~ +65°C (-4°F ~ 149°F)
• Overload Protection: All outputs in a short circuit, overload are protected. Power output of 0-15 seconds delay locks
• Outer Steel Case Size: 120mm x 95mm 38mm (4.72in. x 3.74in. x 1.49in.)
• Weight: 315g

Model No. VIS-AKEYTAG:

• Proximity Contactless Smart Entry Keyfob 26 bit 125khz
• Range: 5cm-10cm (1.97″-3.94″)
• Water proof
• Shock proof
• Uses ultrasonic connection
• Each tag has a unique pre-assigned code (8 digit number) printed on the back
• Dimensions: 39mm x 35mm x 7mm (1.54″ x 1.38″ x 0.28″)

• Operating Frequency: 315mhz
• Number of Codes: 1,048,576
• Operating Voltage: DC12V
• Operating Distance: Up to 160ft (50m) – The maximum range needs to be used in an open area. The distance will start to diminish based on some type of interference such as metal, concrete and others.
• Operating Temperature: 0°C-70°C or 32°F – 158°F
• Current Draw: 19mA
• Compatible Transmitter: VIS-8005
• RF channels: One
• No. of Remotes that are able to connect to one Receiver: Up to 50
• Case Construction: ABS Plastic
• Dimensions: 62*43.5*30mm (2.44* 1.71*1.18 Inches)
• Weight: 43g or 1.52 Ounces
• Functions: 4 (Default) 4 second momentary, latch, toggle (On/Off), press on function

Model No. VIS-8005:

• Frequency: 315 MHz
• Chip: 1527
• Input Voltage: 6V
• Button Quantity: 1 buttons
• Input Power: 0.06W
• Compatible Receiver: VIS-8004
• Input Current: 0.01A
• Operating Distance: Up to 160ft (50m) – The maximum range needs to be used in an open area. The distance will start to diminish based on some type of interference such as metal, concrete and others.

Model No. VIS-8006:

• External hard wire Door Bell for VIS-3000 Keypad/Reader Access Control
• Dimensions: L87xW62xH23 mm or L3.43xW2.44xH0.90 Inches

Model No. VS-VIS-APROXCARD/26:

Proximity cards (or access cards) are hybrid technology that incorporate a simple electric circuit (proximity tag and coil) embedded in a plastic card. No battery is needed and the circuit is not removable without destroying it and the card. When the card is correctly positioned with respect to a reader a high speed RF signal passes between card and reader and unique data is transferred. This ISO standard proximity card is 1.8mm thick and can have printed material attached to the front. It is supplied with a pre-assigned unique code.